Large Surface Land clearing

The 1405 is a 5-tine plow, cutting 3 metres (10ft) wide and capable of deep ripping to 750mm (30") deep. A very gradual angle of approach on the tine creates a >boiling= effect on the soil as it passes over the ripper shank. This is accentuated by fitting a twisted ripper point, curved to direct the clay to either side of the tine and create an even mixing effect across the whole machine. Ripper shanks are of a stump-jump design, to allow use of the machine in newly cleared forest country, or grazing land with old stumps still in place.
It is suited for use with a 95E Challenger tractor (410hp) at a working speed of 6-7kph.

Specifications

  • Five, 2" x 6" curved ripper shanks with twisted shank plates.
  • 1-1/4" high-tensile base plate on body with 1-1/8" tine mount bolts.
  • 3-1/4" spherical bearings on tine pivot pins.
  • Stump-jump system with two, 2-1/2 gallon nitrogen accumulators.
  • Heavy-duty 4-1/2" x 12" displacement cylinders, with plain spherical bearings on shaft end.
  • Rear carriage with tandem flotation tires; 50 x 20.
  • Heavy-duty truck type wheel hubs with 4" axles and clamps.
  • Independent lift, front & rear, with two pairs of 5" x 12" lift cylinders. Lockout valves on hoses.
  • Heavy-duty swivel hitch on drawbar frame.
  • 1-3/4" pins attaching displacement cylinders to ripper shanks.